RF Transmitters Nomad™
ON/OFF Speed Control
NomadTM is an RF Transmitter and an optional component of SSC’s Pace-One Zone Speed Control (ZSC) system. When switched “ON”, it sends out an RF signal to the ZSC Receiver on the vehicle. When the vehicle is in range of the RF signal, it will limit top travel speed to the programmed level.
Multiple Applications
NomadTM is designed for use by facility maintenance personnel as a temporary mobile safe zone. This is ideal when performing maintenance on manufacturing equipment, cleaning up spills, working on elevated platforms, or used where excess inventory is staged or repackaged. NomadTM can be placed on mobile equipment like rolling ladders or lifts; whenever in use, all traffic in range slows around them.
No Wires
Zone and transmit power are set with dip switches on the circuit board. NomadTM is powered by two CR2477 batteries, giving it over a two-year life.
Need a Quote?
Give us a call at : (713) 465-8839
How It Works
Be Aware - Stay Vigiliant
PEOPLE USING NOMADTM SHOULD ALWAYS BE ON GUARD WHEN WORKING AROUND FORKLIFTS AND OTHER MOBILE EQUIPMENT, TO HELP PROTECT THEM FROM EQUIPMENT IN MOTION.
Likewise, equipment operators should ALWAYS observe proper operating procedures and slow vehicles when operating around pedestrians and in high-traffic areas.
NomadTM X
Mounting / Components
NomadTM X is mounted on each side of a pedestrian crossing. It can be mounted on a crossing gate, pedestrian barrier, or standalone support. Each NomadTM X consists of a mounting box containing a PC board with an internal timer, push-button, battery, and pilot light (LED).”
The NomadTM IR/RF are battery power but can also be order with a 110v plug as well.
Crosswalk Activation
NomadTM X is activated by depressing a push button on the mounting box. This powers NomadTM X and generates an RF signal that slows Pace-One-equipped vehicles AND wakes the NomadTM X on the opposite side of the crosswalk. In addition to slowing travel speeds, the LEDs on both boxes flash as visual indicators that NomadTM X is activated. The activation time is programmable on the NomadTM X circuit board. With this design, we have slower travel speeds or optional forced STOP (electric trucks) at crosswalks, but only when there are pedestrians present. This continues SSC’s design directive of improving safety and doing so with minimal effects on productivity.
Do You Have the Programmer?
Click the button to get more information on our μCal™ programmer. With this device, you can program any of our programmable products.